6070 Aluminum Ingot

 

Aluminum 6070 is a high-strength aluminum alloy material with the following specific information:

Standard: 6070 aluminum is usually produced and tested according to EN 573-3 and EN 515 standards. According to these standards, the chemical composition range of 6070 aluminum is as follows: Copper (Cu) content is 1.2-1.8%, manganese (Mn) content is 0.4-0.8%, magnesium (Mg) content is 0.6-1.0%, silicon (Si) content is 0.4-0.8%, zinc (Zn) content is 0.15%, and aluminum (Al) is the balance.

 

Mechanical properties: 6070 aluminum has excellent mechanical properties, with a yield strength of 340 MPa, a tensile strength of 480 MPa, and an elongation of 12%.

 

Uses: 6070 aluminum is widely used in aerospace, military, automotive manufacturing, shipbuilding, construction and railway vehicles. In the aerospace field, 6070 aluminum is mainly used to manufacture structural components such as aircraft, missiles, and satellites, with good strength and rigidity. In the military field, 6070 aluminum is usually used to manufacture equipment parts for heavy equipment such as tanks and armored vehicles. In automotive manufacturing, 6070 aluminum is usually used to manufacture car bodies, frames, and components to improve the safety and fuel economy of automobiles. In the construction field, 6070 aluminum is commonly used for door and window frames, ceilings and other components. In the railway vehicle field, 6070 aluminum is usually used for train body structural components and car components.

 

States: 6070 aluminum has various states to choose from, including T6, T6511, T651, and O. Among them, T6, T651 and T6511 states are heat treatment states, with high strength and hardness, and are suitable for applications with high requirements for strength and corrosion resistance. The O state is an annealed state with lower strength and hardness, and is suitable for some applications that require good formability.

 

Advantages: 6070 aluminum has good strength, rigidity, and corrosion resistance, and is suitable for a variety of high-load, high-strength, and high-demand applications. At the same time, it also has good machinability, weldability, and high-temperature performance, which is convenient for processing and manufacturing. In addition, due to its high copper and manganese content, it can improve the hardness and strength of the material.

 

Disadvantages: Compared with other aluminum alloy materials, the price of 6070 aluminum is relatively high, and it may not be suitable for some low-strength and high-formability application scenarios.

 

Most Common Forms: The most common forms of 6070 aluminum include aircraft structural components, automotive body parts, military equipment, doors and windows and construction sheets, railway vehicle structural components, etc. The comparison of different country grades is as follows: the US grade is AA6070, and the European grade is EN AW-6070.

 

In summary, 6070 aluminum is a high-strength aluminum alloy material that is widely used in aerospace, military, automotive manufacturing, shipbuilding, construction and railway vehicles and other fields. Different states can meet different needs and have good processing and manufacturing performance. Its main advantages are good strength, rigidity, and corrosion resistance, which can be used in a variety of high-load, high-strength, and high-demand applications. Its main disadvantage is that the price is relatively high, and it may not be suitable for some low-strength and high-formability application scenarios. The most common forms include aircraft structural components, automotive body parts, military equipment, doors and windows and construction sheets, railway vehicle structural components, etc.

 

 

Article	Aluminium ·
Standard	AISI 、ASTM 、EN 、BS 、GB 、DIN 、JIS
Material	1060、1065、1070、1070A 、1080、, 1080A 、,1085、1100、1200、1230、1450、1260、1370、1275、1185、1285、1385、2004、2011、2014、 2017、2014A 、2017A 、2214、2117、2218、2618、2618A 、2219、2519、2024、2524、3002、3102、3103、1235、1435、3003、3103、,3103A 、 3203、3004、3004A 、 3005, 3006 , 3007 、3107、1050、1060、2014、2024、3003、5052、5083、6082、7075、5005、5052、5083、6061、 6063,7075,6082,7075,7050,7A04,7A09,8011,8082, etc
Size	Aluminum rod: φ 10mm- φ410mm Aluminum plate: 0.5mm-600mm Aluminum square bar: 8mmx8mm-570mmx10mm Angle aluminum: 8mmx8mmx1mm-280mmx40mmx4mm Aluminum roll: 0.3-3mm or as required
State	HO,H12,H14,H16,H18,H19,H22,H24,H26,H28,F,H112,H111 T651,T3,T451,T4,T6,
Output to	Singapore, Indonesia, South Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, the United States, and Egypt, India, Kuwait, Dubai, Kuwait, Peru, Mexico, and Russia, Malaysia, etc.
Pack	Bundle packaging, export standard packaging or according to customer requirements
Delivery time	7-15 days or according to the order quantity or negotiation
Price clause	Price terms CIF, FOB, CFR.
Pay	Letters of credit, wire transfer, etc
Minimum order	One ton

 

 

Why choose us?

• We take pride in producing high-quality Forged Aluminum products and offering professional service as a supplier and manufacturer.
• We firmly believe that quality is the life of an enterprise, and high-quality raw materials are an important condition for ensuring product quality.
• Our focus is on producing the best Forged Aluminum products and delivering professional service to our customers.
• After years of development, our company has organized a professional production team about 6070aluminum and has an independent production workshop. Now we have a number of advanced production lines and integrate production, design, sales, and considerate after-sales, becoming a professional comprehensive enterprise.
• We are a supplier and manufacturer of Forged Aluminum products, and we offer exceptional service and prices.
• We strive to make business management easier, while effectively reducing errors, improving efficiency and reducing losses.
• We are a reliable supplier and manufacturer of Forged Aluminum products, with a strong emphasis on quality and service.
• We respect human nature, respect skills, regard excellent employees as the core assets of the company, provide training and learning opportunities for employees, and enhance and develop their abilities.
• We take pride in our products and our ability to provide excellent service as a supplier and manufacturer of high-quality Forged Aluminum products.
• We actively implement green development in accordance with the fulfillment of corporate social responsibility and the requirements of our own development.

Hot Tags: 6070 aluminum ingot, China 6070 aluminum ingot suppliers, factory