SCM435H Chemical composition
| C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
|---|---|---|---|---|---|---|
| 0.32-0.39 | 0.15-0.35 | 0.55-0.9 | 0.03 | 0.03 | 0.85-1.25 | ≤0.25 |
| Mo | Al | Cu | Nb | Ti | V | Ce |
| 0.15-0.3 | ≤0.3 | |||||
| N | Co | Pb | B | Other | ||
Tel:+86-021-64586502
Email: info@yijinmetal.com
Products Description SCM435H is an alloy steel type that demands meticulous attention during the processing stage to guarantee optimal outcomes. Here are some crucial considerations when processing SCM435H: Material Preparation: Thoroughly inspect the raw material for any defects or impurities....
| C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
|---|---|---|---|---|---|---|
| 0.32-0.39 | 0.15-0.35 | 0.55-0.9 | 0.03 | 0.03 | 0.85-1.25 | ≤0.25 |
| Mo | Al | Cu | Nb | Ti | V | Ce |
| 0.15-0.3 | ≤0.3 | |||||
| N | Co | Pb | B | Other | ||
| Properties | Conditions | ||
|---|---|---|---|
| T (°C) | Treatment | ||
| Density (×1000 kg/m3) | 7.7-8.03 | 25 | |
| Poisson's Ratio | 0.27-0.30 | 25 | |
| Elastic Modulus (GPa) | 190-210 | 25 | |
| Tensile Strength (Mpa) | 1158 | 25 | oil quenched, fine grained, tempered at 425°C |
| Yield Strength (Mpa) | 1034 | ||
| Elongation (%) | 15 | ||
| Reduction in Area (%) | 53 | ||
| Hardness (HB) | 335 | 25 | oil quenched, fine grained, tempered at 425°C |
Thoroughly inspect the raw material for any defects or impurities. Check for cracks, inclusions, or other imperfections that could affect the quality of the final product. If any issues are detected, appropriate measures should be taken to address them before proceeding with processing.
Ensure that the material is properly cleaned and degreased to remove any contaminants that could interfere with subsequent processing steps. This can be done using solvents or mechanical cleaning methods.
Machining:
When machining SCM435H, select the appropriate cutting tools and parameters. Consider the hardness and toughness of the material to determine the optimal tool geometry, cutting speed, feed rate, and depth of cut. Using the wrong tools or parameters can lead to tool wear, poor surface finish, or even damage to the workpiece.


Apply proper cooling and lubrication during machining to reduce heat generation and tool wear. Coolants and lubricants can help improve the cutting performance and prolong tool life.
Heat Treatment:
SCM435H often requires heat treatment to achieve the desired mechanical properties. Follow the recommended heat treatment procedures carefully, including heating temperature, holding time, and cooling rate. Improper heat treatment can result in inconsistent properties or even failure of the material.
Use proper heat treatment equipment and ensure accurate temperature control. Monitor the process closely to ensure that the material is heated and cooled uniformly.
Welding:
If welding is required, use appropriate welding techniques and consumables. SCM435H is a high-strength alloy steel, so special attention should be given to welding procedures to ensure strong and reliable welds. Select the correct welding electrode or filler metal based on the material's composition and properties.
Preheat and post-weld heat treatment may be necessary to reduce the risk of cracking and improve the weld quality. Follow the recommended preheating and post-weld heat treatment temperatures and times.
Quality Control:
We take pride in our ability to provide custom solutions for our customers' unique needs.
We analyze and compare the previous products and the current technical situation of our SCM435H, and develop new technical specifications and processes.
Our customers trust us to deliver high-quality Cold-rolled Steel products on time and on budget.
We strictly implement the warm and thoughtful after-sales service, adhere to the development of good professional ethics.
We offer a wide range of Cold-rolled Steel products to meet diverse customer needs.
We adhere to the customer-centric and brand-oriented business philosophy, and continue to provide customers with reliable and excellent products and services.
Our factory is committed to upholding the highest standards of safety and quality.
All staff of our company and all departments work together to combine business management, professional technology, quantitative statistical methods and ideological education.
Our Cold-rolled Steel products are known for their durability and reliability.
Relying on the superior conditions and strong advantages of mass production, we are able to meet the different needs of our customers.
Hot Tags: scm435h, China scm435h suppliers, factory, 309 Stainless Steel, 1 4438, F65 Stainless Steel, SUS416, Inconel600, S30908