Big
video
Big

Big Stock For NM500 Wear Resistant Steel Plate For Sale

Products Description Control of Welding Current and Speed Current Control : When performing shielded metal arc welding on NM500 wear - resistant steel plates, the welding current is determined according to the diameter of the electrode. For an electrode with a diameter of 4.0mm, the current can...

Description
Products Description

 

 

Control of Welding Current and Speed

 

Current Control: When performing shielded metal arc welding on NM500 wear - resistant steel plates, the welding current is determined according to the diameter of the electrode. For an electrode with a diameter of 4.0mm, the current can be set between 160 - 210A; for an electrode with a diameter of 5.0mm, the current range is from 200 - 260A. When welding thicker steel plates in the flat - welding position, a relatively large current is generally used. However, it is necessary to avoid problems such as electrode overheating and coating detachment caused by an overly large current. If the current is too low, the arc will be unstable and the fluidity of the molten pool will be poor, resulting in poor weld formation and defects such as slag inclusion and incomplete penetration.

 

Speed Control: The welding speed is relatively slow, approximately 10 - 20cm/min. The welding speed and welding current are inter - related and they jointly affect the welding heat input. If the heat input needs to be controlled, on the basis of appropriate adjustment of the current, a reasonable welding speed is crucial. If the welding speed is too fast, the heat input to the weld will be insufficient, which may lead to poor fusion of the weld, lack - of - fusion, or undercut; if the welding speed is too slow, the heat input to the weld will be excessive, resulting in overheating of the weld metal and coarse grains, which will affect the mechanical properties of the weld.

 

 

 

 

 

 

Standard GB/T709-2006, ASTM A36, JIS G4051, DIN EN 10083, SAE 1045, ASTM A29M
Thickness 0.15mm-300mm
Width 500-2250mm
Length 1000mm-12000mm or according to customer's special request
Application 1.Automobile, Bridges, Buildings. 2.Machinery, Pressure vessel industries. 3.Ship building, Engineering construction. 4.Mechanical manufacturing, Pavement slab, ect.

15160030093515906117541603120

 

 

 

87e4b5ae-b622-4861-93a2-b74142359eb7
637399067315308502246
2985932891

Pre - heating and Inter - pass Temperature Control

 

Pre - heating: For thicker NM500 wear - resistant steel plates (thickness greater than 20mm) or when welding in a low - temperature environment (below 10℃), pre - heating is usually required. The pre - heating temperature is generally around 100 - 150℃ and can be carried out by means of flame heating or electric heating. The purpose of pre - heating is to reduce the cooling rate of the welded joint, reduce welding stress, and prevent the formation of cold cracks. Appropriate pre - heating can control the heat input during the welding process to a certain extent, because it changes the temperature conditions at the beginning of welding and makes the distribution of subsequent welding heat input more reasonable.

 

Inter - pass Temperature Control: During the welding process, the inter - pass temperature should not be lower than the pre - heating temperature and should be kept as stable as possible. If the inter - pass temperature is too high, it will lead to coarse grains of the weld metal and affect the toughness of the weld. If the inter - pass temperature is too low, cracks may occur. The inter - pass temperature can be adjusted by controlling the welding speed and the interval time, so as to effectively control the heat input and ensure the weld quality.

 

 

 

 

 

Why Choose Us?
We take pride in our ability to provide custom solutions for our customers' unique needs.
We analyze and compare the previous products and the current technical situation of our Big Stock For NM500 Wear Resistant Steel Plate For Sale, and develop new technical specifications and processes.
Our customers trust us to deliver high-quality Cold-rolled Steel products on time and on budget.
We strictly implement the warm and thoughtful after-sales service, adhere to the development of good professional ethics.
We offer a wide range of Cold-rolled Steel products to meet diverse customer needs.
We adhere to the customer-centric and brand-oriented business philosophy, and continue to provide customers with reliable and excellent products and services.
Our factory is committed to upholding the highest standards of safety and quality.
All staff of our company and all departments work together to combine business management, professional technology, quantitative statistical methods and ideological education.
Our Cold-rolled Steel products are known for their durability and reliability.
Relying on the superior conditions and strong advantages of mass production, we are able to meet the different needs of our customers.

Hot Tags: big stock for nm500 wear resistant steel plate for sale, China big stock for nm500 wear resistant steel plate for sale suppliers, factory, SUS304L, S44400, HastelloyB-2, S42000, SUS301, 316 Stainless Steel

(0/10)

clearall