K
video
K

K D47 Steel Plate

Products Description Oxygen-blowing Operation Decarburization Principle : Oxygen is blown into the converter to make the carbon in the molten iron react with oxygen to generate carbon dioxide gas, which escapes, thereby reducing the carbon content. This is one of the key reactions in converter...

Description
Products Description

 

 

 

Oxygen-blowing Operation

 

Decarburization Principle: Oxygen is blown into the converter to make the carbon in the molten iron react with oxygen to generate carbon dioxide gas, which escapes, thereby reducing the carbon content. This is one of the key reactions in converter steel-making, and its chemical equation is .

 

Control of Oxygen-blowing Parameters: The flow rate and time of oxygen-blowing are key parameters. The initial oxygen-blowing intensity is relatively high, for example, around [10 - 15] cubic meters per minute, and it gradually decreases as the carbon content decreases. When the carbon content drops from 4% to 2%, the oxygen-blowing time may need to be around [10 - 15] minutes. Meanwhile, real-time monitoring of parameters such as carbon content and temperature is carried out by using detection equipment such as sub-lances, and the oxygen-blowing operation is dynamically adjusted according to the detection results. If the carbon content drops too quickly, it may lead to excessive temperature of the molten steel or over-oxidation of other elements, and the oxygen-blowing intensity needs to be appropriately reduced.

 

 

 

Continuous Casting Process

 

Preparatory Work

 

Mold: The mold is a core component of continuous casting, and its function is to initially solidify the molten steel into a shell of a certain shape. An appropriate type (such as a slab mold or a billet mold) and size of the mold are selected according to the specifications of the final product (steel plate). The cooling water flow rate of the mold is adjusted according to the casting speed and the specifications of the steel plate. Generally, the cooling water flow rate is [X] cubic meters per hour. Appropriate cooling water flow rate can ensure that the molten steel is uniformly cooled and solidified in the mold, preventing the shell from being too thin or too thick and causing quality problems.

 

Mold Flux: Mold flux suitable for the steel grade is selected, and its melting point, viscosity, and other parameters should match the properties of the molten steel and the continuous casting process parameters. The main function of the mold flux is to form a lubricating and heat-insulating slag film between the molten steel and the mold wall to prevent the molten steel from sticking to the mold wall and also to absorb inclusions and improve the surface quality of the casting blank. The addition amount of the mold flux is controlled at [X] kilograms per minute and is evenly added into the mold by automatic or manual addition devices.

 

Continuous Casting Process

 

Pouring: The refined molten steel is poured into the mold to start continuous casting. The casting speed is set according to the thickness and width of the steel plate. For example, when producing steel plates with a thickness of 10 - 20mm, the casting speed can be controlled at 1 - 1.5m per minute. The reasonable control of the casting speed is crucial for ensuring the quality of the casting blank. If the speed is too fast, the shell may be torn; if the speed is too slow, it will affect the production efficiency.

 

Secondary Cooling: After the outlet of the mold, the shell of the casting blank is still relatively thin, and secondary cooling is required for the casting blank. Air-mist cooling or water-spraying cooling methods are adopted, and the cooling intensity is adjusted according to the temperature and position of the casting blank. The principle of controlling the cooling intensity is to make the casting blank cool uniformly, avoiding cracks and other defects caused by local overheating or overcooling. Through secondary cooling, the casting blank is completely solidified to form a casting blank with a certain strength and dimensional accuracy.

 

Rolling Process

 

Heating in Heating Furnace

 

Determination of Heating Time: The heating time is determined according to the size of the blank and the performance of the heating furnace. Generally, it is [X] hours. The larger the blank size, the longer the heating time; the higher the power of the heating furnace, the shorter the heating time relatively. During the heating process, it is necessary to ensure that the temperature inside and outside the blank is uniform to avoid the occurrence of temperature gradients that may lead to uneven deformation during rolling.

 

 

 

 

 

 

 

NK/K D47 extraStrength Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

Al

N

NK/K D47

0.20

0.55

1.70

0.035

0.035

-

0.020

Nb

V

Ti

Cu

Cr

Ni

Mo

-

-

-

-

-

-

-

2985932891

 

 

 

22e61908-70a1-488e-803e-e95d4dab2612
41b2706ace9176bbc4c2e52cf3fc01647
87e4b5ae-b622-4861-93a2-b74142359eb7

 

Rolling Operation

 

Rough Rolling: A reversible roughing mill is used for multi-pass rolling to roll the blank to a certain thickness. The reduction per pass of rough rolling is controlled at [X] mm, and the rolling speed is [X] m per second. Through multi-pass reduction, the coarse grain structure of the casting blank can be effectively broken, making the internal structure of the steel more uniform. Meanwhile, a reasonable rolling speed can ensure the stability of the rolling process and production efficiency.

 

Finish Rolling: A finishing mill is used to further roll the steel plate thinner, controlling the final thickness accuracy within ±0.1mm. The finishing rolling temperature is maintained at 850 - 950℃. This temperature range helps to obtain good surface quality and dimensional accuracy of the steel plate. The rolling speed is adjusted according to the thickness of the finished product and the equipment capacity. Generally, the thinner the finished product thickness, the faster the rolling speed, but the equipment load and product quality requirements need to be considered.

 

Post-rolling Cooling: A laminar cooling system is used to cool the rolled steel plate. The cooling speed is controlled at 10 - 30℃ per second according to the performance requirements and thickness of the steel plate. By controlling the cooling speed, the steel plate can obtain an appropriate microstructure and performance, such as grain refinement and strength improvement. The cooled steel plate undergoes subsequent treatments such as coiling or straightening to become the final product.

 

 

 

Why Choose Us?
We take pride in our ability to provide custom solutions for our customers' unique needs.
We analyze and compare the previous products and the current technical situation of our K D47 Steel Plate and develop new technical specifications and processes.
Our customers trust us to deliver high-quality Cold-rolled Steel products on time and on budget.
We strictly implement the warm and thoughtful after-sales service, adhere to the development of good professional ethics.
We offer a wide range of Cold-rolled Steel products to meet diverse customer needs.
We adhere to the customer-centric and brand-oriented business philosophy, and continue to provide customers with reliable and excellent products and services.
Our factory is committed to upholding the highest standards of safety and quality.
All staff of our company and all departments work together to combine business management, professional technology, quantitative statistical methods and ideological education.
Our Cold-rolled Steel products are known for their durability and reliability.
Relying on the superior conditions and strong advantages of mass production, we are able to meet the different needs of our customers.

Hot Tags: k d47 steel plate, China k d47 steel plate suppliers, factory, GH3039, C51000, CuZn40, S500QL1, Wear resistant Steel, SUS410

(0/10)

clearall