NV F500 Steel Plate
Products Description In the experiment of analyzing brittle phases by X-ray Diffraction (XRD), the position and intensity of diffraction peaks can be determined through the following methods: Determining the Position of Diffraction Peaks Calculation Based on Bragg's Equation : According to...
Description
Products Description
In the experiment of analyzing brittle phases by X-ray Diffraction (XRD), the position and intensity of diffraction peaks can be determined through the following methods:
Determining the Position of Diffraction Peaks
Calculation Based on Bragg's Equation: According to Bragg's equation , where is an integer, is the X-ray wavelength, is the interplanar spacing, and is the diffraction angle. Given the known X-ray wavelength and the experimentally measured diffraction angle , the interplanar spacing can be calculated, and then the corresponding crystal planes of the diffraction peaks can be determined, thus obtaining the position of the diffraction peaks. Different brittle phases have specific crystal structures and interplanar spacings. By comparing the calculated interplanar spacings with the known standard data, it can assist in identifying the brittle phases.
Comparison with Standard Cards: Use standard databases such as the Powder Diffraction File (PDF) cards of the International Centre for Diffraction Data (ICDD). Compare the XRD patterns obtained from the experiment with the diffraction peak positions in the standard cards to find the matching crystal phases, thereby determining the crystal phases corresponding to the positions of the diffraction peaks and the corresponding crystallographic parameters.
Analysis Using Professional Software: With the aid of professional XRD analysis software, such as Jade, HighScore Plus, etc. These software can automatically identify and mark the positions of diffraction peaks. By performing peak-searching processing on the patterns, the angle values of each diffraction peak can be accurately determined, and then the corresponding crystal planes and crystal phases can be identified.
|
NV F500 extra high general strength property |
|||||||
|
Grade |
Mechanical Property |
Charpy V Impact Test |
|||||
|
Thickness |
Yield |
Tensile |
Elongation |
Degree |
Energy 1 |
Energy 2 |
|
|
NV F500 |
mm |
Min Mpa |
Mpa |
Min % |
-60 |
J |
J |
|
t≤50 |
500 |
610-770 |
16% |
33 |
50 |
||
|
50<t≤70 |
500 |
610-770 |
16% |
33 |
50 |
||
|
70<t≤150 |
500 |
610-770 |
16% |
33 |
50 |
||




Determining the Intensity of Diffraction Peaks
Direct Measurement: Read the intensity values of the diffraction peaks directly from the XRD pattern. The ordinate in the pattern usually represents the diffraction intensity, expressed in units such as count rate or relative intensity. When measuring, it is necessary to select an appropriate measurement range and perform baseline correction to ensure the accuracy of the intensity values. Generally, the height or integrated area of the diffraction peak can be used as a measure of its intensity, but the integrated area can more accurately reflect the intensity of the diffraction peak, especially for broadened or asymmetric diffraction peaks.
Calculation of Relative Intensity: Calculate the relative intensity between different diffraction peaks. The relative intensity refers to the ratio of the intensity of a certain diffraction peak to the intensity of the strongest diffraction peak. By comparing the relative intensities of different diffraction peaks, the crystal structure and composition information of the brittle phases can be analyzed more accurately, because different crystal phases have specific distribution laws of relative intensity of diffraction peaks.
Considering the Influence of Experimental Factors: When determining the intensity of diffraction peaks, it is necessary to consider the influence of experimental conditions on the intensity, such as the intensity of X-rays, the sample preparation method, the sample thickness, and the geometric parameters of the instrument. To obtain accurate and reliable intensity data, multiple measurements need to be carried out under the same experimental conditions, and the data need to be averaged to reduce the influence of experimental errors.
Why Choose Us?
We take pride in our ability to provide custom solutions for our customers' unique needs.
We analyze and compare the previous products and the current technical situation of our NV F500 Steel Plate, and develop new technical specifications and processes.
Our customers trust us to deliver high-quality Cold-rolled Steel products on time and on budget.
We strictly implement the warm and thoughtful after-sales service, adhere to the development of good professional ethics.
We offer a wide range of Cold-rolled Steel products to meet diverse customer needs.
We adhere to the customer-centric and brand-oriented business philosophy, and continue to provide customers with reliable and excellent products and services.
Our factory is committed to upholding the highest standards of safety and quality.
All staff of our company and all departments work together to combine business management, professional technology, quantitative statistical methods and ideological education.
Our Cold-rolled Steel products are known for their durability and reliability.
Relying on the superior conditions and strong advantages of mass production, we are able to meet the different needs of our customers.
Hot Tags: nv f500 steel plate, China nv f500 steel plate suppliers, factory, SUS631, 654SMo, SUS303, Inconel690, S44002, 440C








